Paving Asphalt 60/70 S

PENETRATION GRADED ASPHALT PRODUCT
Product Description
Paving Asphalt 60/70 S is a penetration graded asphalt product derived from specially selected crude oils via carefully
controlled refning processes.
The quality of ExxonMobil products is assured for every delivery. They are produced and controlled according to the
ExxonMobil Product Quality Management System, EN ISO 9000 or equivalent standard.

Applications
Paving Asphalt 60/70 S is recommended for road construction. If other applications are considered, then users should
conduct appropriate testing before use.

Properties & Specifcations
Paving Asphalt 60/70 S meets the following specifcation requirements:

Asphalt Unit Method 60/70 S
Penetration at 25° C x 0.1 mm ASTM D 5 60-70
Softening Point °C ASTM D 36 47-56
Ductility at 25° C, 5 cm/min (min) cm ASTM D 113 150
Wax content (max) mass % DIN EN 12606-1 2
Specifc gravity – ASTM D 70 1.01-1.05
Flash Point (min) °C ASTM D 92 232
Solubility in trichloroethylene (min) mass % ASTM D 2042 99.5
Thin Film Oven Test at 163° C (ASTM D1754)
Change of mass (max) +/- mass % ASTM D 1754 0.2
Retained penetration (min) % ASTM D 5 60
Ductility at 25° C , 5 cm/min (min) cm ASTM D 113 100
Above specifcations may be subject to change.

Health & Safety

Detailed health and safety information for this product is provided in the Material
Safety Data Sheet (MSDS), available upon request through your local sales
representative or from www.ExxonMobil.com